Texas Instruments TI-84 Plus Guide Book

Chapter 18: Memory and Variable Management 531
1. From the RAM ARCHIVE ALL menu, select 1:All RAM to display the RESET RAM
menu or
2:Defaults to display the RESET DEFAULTS menu.
2. If you are resetting RAM, read the message below the RESET RAM menu.
• To cancel the reset and return to the
HOME screen, press Í.
• To erase RAM memory or reset defaults, select
2:Reset. Depending on your
choice, the message
RAM cleared or Defaults set is displayed on the home
screen.
Resetting Archive Memory
Resetting Archive MemoryResetting Archive Memory
Resetting Archive Memory
When resetting archive memory on the TI-84 Plus, you can choose to delete from user
data archive all variables, all applications, or both variables and applications.
To reset all or part of user data archive memory, follow these steps.
1. From the
RAM ARCHIVE ALL menu, press ~ to display the ARCHIVE menu.

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-