Texas Instruments TI-84 Plus Guide Book

Chapter 16: Programming 447
Not all graph styles are available in all graphing modes. For a detailed description of
each graph style, see the Graph Styles table in Chapter 3.
PRGM I/O (Input/Output) Instructions
PRGM I/O (Input/Output) InstructionsPRGM I/O (Input/Output) Instructions
PRGM I/O (Input/Output) Instructions
PRGM I/O Menu
PRGM I/O MenuPRGM I/O Menu
PRGM I/O Menu
To display the
PRGM I/O (program input/output) menu, press ~ from within the
program editor only.
CTL I/O EXEC
1: Input
Enters a value or uses the cursor.
2: Prompt
Prompts for entry of variable values.
3: Disp
Displays text, value, or the home screen.
4: DispGraph
Displays the current graph.
5: DispTable
Displays the current table.
6: Output(
Displays text at a specified position.
7: getKey
Checks the keyboard for a keystroke.
8: ClrHome
Clears the display.
9: ClrTable
Clears the current table.
0: GetCalc(
Gets a variable from another TI-84 Plus.
A: Get(
Gets a variable from CBL 2™ or CBR™.
B: Send(
Sends a variable to CBL 2 or CBR.

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-