Texas Instruments TI-84 Plus Guide Book

Chapter 11: Lists 265
2. Enter xlistname, press ¢, enter ylistname, and then press ¤ to designate list names
into which you want the selected data to be stored.
3. Press Í. The graph screen is displayed with
Left Bound? in the bottom-left
corner.
4. Press } or † (if more than one stat plot is selected) to move the cursor onto the stat
plot from which you want to select data points.
5. Press | and ~ to move the cursor to the stat plot data point that you want as the left
bound.
6. Press Í. A 4 indicator on the graph screen shows the left bound.
Right Bound?
is displayed in the bottom-left corner.

Texas Instruments TI-84 Plus Specifications

General

Battery type	AAA
Power source	Battery
Number of batteries supported	4
Type	Graphing
Cover	No
Form factor	Pocket
Control type	Buttons
Product color	Black
USB port	Yes
USB 2.0 ports quantity	1
Digits	- digits
Display number of lines	8 lines
Display number of characters	16
RAM capacity	0.024 MB
ROM capacity	0.480 MB
Storage media type	-