ELECTRICAL
673831-Rev A 4-75
4
Alternator
Removal and Installation
See Figure 4-63.
1. Park the mower safely. (See “Park Mower Safely” on
page 1-6.)
2. Raise the hood.
3. Disconnect the negative (–) battery cable at the
battery.
Figure 4-63
Label all wires before disconnecting to ensure correct
installation.
4. Disconnect alternator cable (1) and wire connector
(2).
5. Loosen screw (8) and push the alternator (3) toward
the engine.
6. Remove fan drive belt (9) from alternator pulley.
7. Support the alternator (3).
8. Remove screw (8), lock washer (7), and flat washer
(6).
9. Remove screw (5) and nut (4).
10. Remove alternator (3).
Installation Notes
• Install the alternator by reversing the order of
removal.
• Adjust fan belt tension. (See “Fan Belt” on page 3-6.)
To Next Page
Loading...
