CUTTING UNITS
673831-Rev A 8-3
8
Repair Specifications
Reel Drive Motor—Rear Cover-to-Body Retaining
Screw Torque
lb-ft (N·m) 18.5 (25)
Reel Drive Motor with -4 ORFS Case Drain—Case
Drain Fitting Torque
lb-ft (N·m) 11 (14.9)
Reel Drive Motor with -6 ORFS Case Drain—Case
Drain Fitting Torque
lb-ft (N·m) 17 (23)
Reel Drive Motor—IN/OUT Port Fittings
lb-ft (N·m) 60 (81.3)
Bedknife Adjustment Assembly—Inside of Belleville
Washer-to-Cradle Initial Adjustment Distance
in. (mm) 1.500 ± 0.060 (38.1 ± 1.5)
Bedknife Adjustment Assembly—Bedknife Adjustment
Rod-to-Reel Frame Tube Initial Adjustment Distance
in. (mm) 4.0 (101.6)
Bedknife Backing Mounting Screw Torque
lb-ft (N·m) 25–37 (33.9–50.2)
Bedknife Mounting Screw Torque
lb-in. (N·m) 90–120 (10.2–13.6)
Reel Bearing Housing Assembly Mounting Screw
Torque
lb-ft (N·m) 18–22 (24.4–29.8)
Front Roller Lock Nut Initial Torque
lb-in. (N·m) 10–30 (13.6–40.7)
Front Roller Rotational Torque
lb-in. (N·m) 3–7 (0.3–0.8)
Rear Roller Mounting Screw Torque
lb-ft (N·m) 16–24 (21.7–32.5)
To Next Page
Loading...
