3-10 673831-Rev A
ENGINE
3
8. Fill radiator through expansion tank with clean water
and ethylene glycol based antifreeze mixed for
coldest ambient temperature.
9. Install expansion tank cap and start engine following
instructions in “Safety and Operation Manual.”
10. Stop the engine and allow the radiator to cool.
11. Fill expansion tank to cold mark on expansion tank.
12. Check hydraulic oil level. Add oil if needed.
Allow the engine coolant to completely cool
before removing the expansion tank cap. Hot
coolant sprayed from the cap can cause serious
personal injury.
To Next Page
Loading...
Need help?
General
