TOHATSU MFS 2 Service Manual

6-16
Lower Unit
4st 2/2.5/3.5 2007
25) Disassembly of Gear Case
1. Check bearings 1 and 2 for cracks and generation of
abnormal noise. Replace if necessary.
1
2
· Do not remove bearing unless it is replaced
with new one.
· Before removing, check bearing for play or
deflection. Replace if necessary.
2
2
3
3
4
3. Remove bearing 4.
Bearing Attachment 3 3 :
P/N. 3AB-99905-0
Driver Rod 3 4 :
P/N. 3AB-99702-0
Do not reuse removed bearing.
CAUTION
1
Do not reuse.
2. Remove bearing 1 by using commercially available bearing
puller.
2
Do not reuse.
MFS2sec06070524.qxd07.5.243:20 PM  ページ16

TOHATSU MFS 2 Specifications

General

Brand	TOHATSU
Model	MFS 2
Category	Engine
Language	English