TOHATSU MFS 2 Service Manual

1-9
1
4st 2/2.5/3.5 2007
8) Inspection of Stop Switch
1. Press stop switch 1 hard or pull out lock 2 from stop switch
1 to check that engine stops.
2
1
2
1
10) Idle Operation
1. After engine has warmed up in neutral, use tachometer to
check idle engine speed is as specified.
1
Idle Engine Speed :
1,250 - 1,350 r/min
RPM
9) Cooling Water Check Port
1. Check that cooling water check port 1 discharges water
during engine runs.
1
Tachometer :
P/N. 3AC-99010-0
1 High Tension Cord
· Use tachometer to measure after warm up
operation.
· Set the measurement mode to 4 stroke 2
cylinder · 2 stroke 1 cylinder.
MFS2sec01070524.qxd07.5.243:05 PM  ページ9

TOHATSU MFS 2 Specifications

General

Brand	TOHATSU
Model	MFS 2
Category	Engine
Language	English