TOHATSU MFS 2 Service Manual

Fuel System (Carburetor)
4-8
4st 2/2.5/3.5 2007
6) Inspection of Carburetor
1. Check air and fuel passages for dirt in the jet and foreign
substances. Clean carburetor body with cleaning fluid.
2. Squirt all passages and jet with compressed air.
2
1
3
CAUTION
· Point the compressed air downward,
taking care that detergent and dust do
not enter the eyes and do not damage
small parts of the carburetor.
· Do not use wire to clean the jet. Doing so
may enlarge the jet hole, resulting in
significantly reducing the performance.
3. Check main jet 1, main nozzle 2 and slow jet 3 for dirt.
Clean or replace if necessary.
4. Check float valve for bend and wear. Replace if necessary.
5. Check float for deformation. Replace if necessary.
MFS2sec04070524.qxd07.5.243:17 PM  ページ8

TOHATSU MFS 2 Specifications

General

Brand	TOHATSU
Model	MFS 2
Category	Engine
Language	English