1-7
1
4st 2/2.5/3.5 2007
1
å ∫
ç∂
ab
cc
dd
c
d
Lighter
Heavier
300cm
3
250cm
3
1
4st OIL
4st
OIL
4. Predelivery Inspection
1) Steering Handle
å Check installations for tension and play.
∫ Adjust steering friction.
ç Check throttle grip for movement.
(Fully Open a / Fully Closed b)
∂ Adjust throttle friction.
2) Gear Shift
1. Check shift lever 1 and propeller shaft for smooth
movement of the shift between forward (F) and neutral (N)
while engine is operating.
3) Engine Oil
1. Set outboard motor straight ahead and vertical.
2. Fill with Engine Oil.
4 Stroke Engine Oil :
300cm
3
(10 fl.oz)
Engine oil is removed before shipment to
prevent leakage during transportation.
3. Use oil level gauge to check oil quantity.
(Straight ahead and vertical)
4) Gear Oil
1. Check quantity of gear oil.
Gear Oil :
180cm
3
(6 fl.oz)
Spilling of oil from upper plug when removed
indicates that gear case is filled with specified
quantity of gear oil.
1 Oil Filler Cap
1 Oil Plug 2 Gasket
1 Steering Adjust Screw c Lighter d Heavier
Do not reuse.
MFS2sec01070524.qxd07.5.243:05 PM ページ7