6
6-21
4st 2/2.5/3.5 2007
34) Installation of Lower Unit
1. Set cam rod 1 to neutral (N) position.
2
3
2
1
OIL
GEARGEAR
GEAR
3
33) Filling with Gear Oil
1. Feed gear oil to specified quantity 2. "Refer to Chapter 3."
Perform "Inspection of Gear Case (Leakage)" in
Chapter 3 if necessary.
3 Gasket
Do not reuse.
3 Gasket
Do not reuse.
MFS2sec06070524.qxd07.5.243:20 PM ページ21