TOHATSU MFS 2 Service Manual

3-21
3
4st 2/2.5/3.5 2007
23) I nspection of Cooling Water Passages
1. Check water strainer 1 for clogging. Clean if necessary.
2. Set outboard motor in the water and start engine.
3. Check that cooling water is discharged from cooling water
check port 2. If not, check water pump and cooling water
passage in the engine.
1
2
MFS2sec03070524.qxd07.5.243:16 PM  ページ21

TOHATSU MFS 2 Specifications

General

Brand	TOHATSU
Model	MFS 2
Category	Engine
Language	English