Toshiba B-EP2DL Series System Mode Manual

3. ONLINE MODE EO13-33005
3.1 Outline of the ON LINE Key Operation
3- 1
3. ONLINE MODE
3.1 Outline of the ON LINE Key Operation
ON LINE Mode
Hold down [FEED]+ [PAUSE]+ [POWER]
(3 sec. or more)
Forced
power OFF
Power OFF
Press the [POWER] key
(more than 3 seconds)
Press the [FEED] key
Feed or
Restart
Press the [PAUSE] key
PAUSE
Power OFF
Hold down the
[POWER] key.
Feed
Press the [FEED]
key
Press the [POWER]
key
Display the setting
information (RS-
232C, IP, Bluetooth
)
Press the
[PAUSE] key
Hold down the
[POWER] key.
Power OFF
Feed
Press the
[FEED] key
Display the setting
information (ＩｒＤＡ)
Press the
[POWER] key
Press the
[PAUSE] key
Power OFF
Feed
Press the
[FEED] key
Press the [POWER] key
Press the [PAUSE] key
Manual Threshold Setting
Feed Gap, Black Mark Sensor
Reset
[PAUSE] ke
y
Mode setting
[PAUSE] ke
y
Parameter setting
[PAUSE] key
Adjustment setting
[PAUSE] ke
y
Dump Mode
BASIC setting
Interface setting
Sensor setting
EXPAND mode
[PAUSE] key
[PAUSE] key
[PAUSE] key
[PAUSE] key
[PAUSE] key[FEED] key
[FEED] key
[FEED] key
[FEED] key
[FEED] key
[FEED] key
[FEED] key
[FEED] key
[FEED] key
System Mode
Hold down the
[POWER] key.
Hold down the
[PAUSE] key.
Hold down the [FEED]
key.
Press [FEED]: Moves the menu in the opposite direction from
when [PAUSE] is pressed.
Press [POWER]: Moves to each setting/process.
Hold down [POWER]: Moves to the reset menu.
* The printer power cannot be turned off under this condition.
Hold down [POWER] (Release after 1.5
or more labels are fed.)
* The printer power cannot be turned off under this condition.

Toshiba B-EP2DL Series Specifications

General

Brand	Toshiba
Model	B-EP2DL Series
Category	Printer
Language	English