4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005
4.4 Parametr Setting
4- 34
4.4.9 Auto Power-off Timing Setting (AUTO OFF)
This setting selects a time for the printer power to turn off automatically. (Factory default is 120min.)
Notes:
1. When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key
is pressed.
2. When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
3. When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter setting,
repeat mode is enabled and the key pressed is repeatedly entered.
4. The change in the parameter setting becomes effective when the [POWER] key is pressed after setting,
then stored in the backup memory.
5. When the AC adapter is connected, the printer power does not turn off even when an auto power-off time
elapses.
AUTO OFF OFF
[PAUSE]
AUTO OFF 1min
[PAUSE]
The power is not automatically turned off.
It takes a shorter time to turn off the power.
AUTO OFF 2min
[PAUSE]
AUTO OFF 298min
[PAUSE]
AUTO OFF 299min
[PAUSE]
AUTO OFF 300min
[PAUSE]
It takes a longer time to turn off the power.
To Next Page
Loading...
Need help?
General