4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005
4.4 Parametr Setting
4- 36
4.4.11 LCD Backlight Off Timing Setting (LCD OFF)
This setting selects a time to turn off the LCD backlight. (Factory default is 3 sec.)
Notes:
1. When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key
is pressed.
2. When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
3. When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter setting,
repeat mode is enabled and the key pressed is repeatedly entered.
4. The change in the parameter setting becomes effective when the [POWER] key is pressed after setting,
then stored in the backup memory.
5. If the LCD backlight off timing is set longer than the power save mode timing, the backlight turns off in
accordance with the power save mode timing setting before the backlight off timing takes effect.
6. When the LCD OFF setting is OFF, the backlight does not turn off even when the printer enters power
save mode.
LCD OFF OFF
[PAUSE]
LCD OFF 1sec
[PAUSE]
It takes a shorter time to turn off the LCD backlight.
LCD OFF 2sec
[PAUSE]
LCD OFF 28sec
[PAUSE]
LCD OFF 29sec
[PAUSE]
LCD OFF 30sec
[PAUSE]
It takes a longer time to turn off the LCD backlight.
The LCD backlight does not turn off.
To Next Page
Loading...
Need help?
General