Toshiba B-EP2DL Series - Beep Check

4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005
4.2 Diagnostic Test
4- 7
4.2.5 Beep Check
This function is used to check for the Buzzer.
[PAUSE]
[POWER]
System mode menu display (Diagnostic)
Print mode for maintenance counter values and various parameter values
<0>SHUTDOWN
Power OFF
While holding down the [FEED] key, press the [POWER] key to turn the
power on.
[FEED] and [Power] Keys
System mode menu display (Shutdown)
<1>DIAGNOSTIC
MAINTENANCE CONT
[PAUSE]
AUTO DIAGNOSTIC
Automatic self-test mode
[PAUSE]
HEAD CHECK
Print head check for broken dots mode
[PAUSE]
LED CHECK
LED check mode
[PAUSE]
LCD CHECK
LCD check mode
[PAUSE]
BEEP CHECK
Beep check mode
[POWER]
CHECKING
Start of Beep check
The beep sounds for 3 sec.
System mode menu display (Diagnostic)
<1>DIAGNOSTIC