3. ONLINE MODE EO13-33005
3.5 Reset Mode
3- 8
3.5 Reset Mode
Reset operation clears the print data sent to the printer from the computer, and returns the printer to an
idle condition.
Rest operation procedure
NOTES:
1. If the [PAUSE] key is held for less than 3 seconds when the printer is in an error or pause state, the
printer restarts printing. However, when a communication error or command error occurs, the printer
returns to an idle condition.
2. When the [PAUSE] key is pressed during printing, the number of unprinted media is displayed.
<1>RESET
The number of unprinted media (See NOTE 2.)
The printer is turned on, standing by, or printing.
ON LINE
[PAUSE]
Press the [PAUSE] key.
To stop printing, or clear the data sent from the computer, press the [PAUSE] key.
The printer stops printing.
PAUSE 52
[PAUSE]
Press and hold the [PAUSE] key for 3 seconds or longer.
The reset menu is displayed.
[POWER]
Press the [POWER] key.
ON LINE
The data sent from the computer will be cleared, and the printer returns to an idle
condition.
To Next Page
Loading...
