4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005
4.3 Mode Setting (Printer Operation Mode)
4- 22
4.3.2 Print Command Language Setting (PCL MODE)
This setting selects print mode.
Notes:
1. When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
2. When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
3. When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter
setting, repeat mode is enabled and the key pressed is repeatedly entered.
4. The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
PCL MODE TPCL Select to TPCL mode (Factory Default)
[PAUSE]
PCL MODE TPCL1 Select to TPCL1 mode
[PAUSE]
PCL MODE LABEL
Select to LABEL mode
[PAUSE]
PCL MODE RCT Select to RECEIPT mode
[PAUSE]
PCL MODE RCT1
Select to RECEIPT1 mode
[PAUSE]
PCL MODE ESC/POS
Select to ESC/POS mode
[PAUSE]
To Next Page
Loading...
Need help?
General