Toshiba B-EP2DL Series - Head Division Setting (HEAD DIV)

4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005
4.3 Mode Setting (Printer Operation Mode)
4- 23
4.3.3 Head Division Setting (HEAD DIV)
When a printing ratio per line is high, the value of this setting is changed to prevent print tone from
becoming lighter.
(1) B-EP2DL Series
(1) B-EP4DL Series
Notes:
1. When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key
is pressed.
2. When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
3. When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter setting,
repeat mode is enabled and the key pressed is repeatedly entered.
4. The change in the parameter setting becomes effective when the [POWER] key is pressed after setting,
then stored in the backup memory.
HEAD DIV AUTO1
Automatic selection from none, 2 or 3 division (Factory default)
[PAUSE]
HEAD DIV DIV3
Fixed to 3 division
[PAUSE]
HEAD DIV AUTO Automatic selection from 2 or 3 division
[PAUSE]
HEAD DIV AUTO1
Automatic selection from none, 2, 3 or 6 division (Factory default)
[PAUSE]
HEAD DIV DIV6
Fixed to 6 division
[PAUSE]
HEAD DIV AUTO Automatic selection from 2, 3 or 6division
[PAUSE]