7. PROGRAM DOWNLOAD MODE EO13-33005
7.2 Software Installation
7- 2
Note:
(1) Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
(2) A USB cable is cautious of the form of a connector.
(3) The interface jig implement by IrDA (TEC) is limited to this product.
(4) The interface jig implement by IrDA (IrCOMM) is an example of reference, and other interface jig
implements may be used for it.
7.2.2 Setup
[Installation procedure]
(1) Start the PC.
(2) Close the all other applications.
(3) Click on the Start button, and select Run.
(4) When the Run dialog box appears, click on the [Browse] button and choose the SETUP.EXE file.
Then, click on the [OK] button.
(5) Click on the [OK] button on the Run dialog box.
(6) Follow the instructions appearing on the screen to install the software.
(7) When the installation is completed, the termination screen is displayed.
Now, the installation of the Download Program for B-EP has been completed.
Note: The firmware files are separately described.
To Next Page
Loading...
Need help?
General