3. ONLINE MODE EO13-33005
3.7 Parameter Setting
3- 10
3.7 Parameter Setting
This parameter setting used to following setting.
LCD Message Description Default Setting
LCD DENSITY LCD density setting 0
FONT CODE Character code setting PC-850
ZERO FONT Font 0 setting 0 (without slash)
LCD LCD language setting ENGLISH
CODE Control code setting AUTO (automatic selection)
EURO CODE EURO font code setting B0
MAXI CODE MaxiCode specification setting TYPE1
AUTO OFF Auto power-off timing setting 120min.
SLEEP Power save mode timing setting 3sec.
LCD OFF LCD backlight off timing setting 3sec.
AUTO HD CHK Automatic print head check for broken dots
setting
OFF (An automatic print head check for broken
dots is not performed.)
HEAD CHECK Print head check for broken dots after cover
close setting
OFF (A print head check for broken dots is not
performed after the cover is closed.)
HEAD ERR PRT Resume printing after broken dots error setting OFF (The printer does not resume printing after a
broken dots error occurs.)
FEED CHECK Feed to top of feed after cover close setting OFF (A feed to the top of feed is not performed.)
BEEP VOL Beep volume setting 1
XML XML setting OFF
For details, refer to System Mode (for service personnel or administrator).
Operation Example
ON LINE
“PAUSE” is displayed.
PAUSE
[PAUSE]
Press the [PAUSE] key.
[PAUSE]
Press and hold the [PAUSE] key for at least 3 seconds.
<1>RESET
The reset menu is displayed.
<3>PARAMETER SET
[POWER]
System mode menu display (Parameter setting)
Press the [POWER] key.
The printer is turned on, standing by, or printing.
LCD DENSITY 0
[POWER]
LCD density setting
Press the [POWER] key.
FONT CODE PC-850
[POWER]
Character code setting
Press the [POWER] key.
ZERO FONT 0
[POWER]
Font 0 setting
Press the [POWER] key.
Continued to the next page.
LCD ENGLISH
[POWER]
LCD language setting
Press the [POWER] key.
When “<1>PARAMETER SET” appears, press the [PAUSE] or [FEED] keys until the
following display appears.
[PAUSE] or [FEED]
To Next Page
Loading...
Need help?
General