4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005
4.7 Sensor Display/Adjustment
4- 67
4.7.4 Backlash step Count Adjustment 1(BACKLASH1)
This setting selects a backlash step count for a feed in forward direction.
Setting range of backlash1 is 00 to 99.
(Factory default: 01 (B-EP2), 08 (B-EP4))
Notes:
1. When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
2. When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
3. When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
4. The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
BACKLASH1 00
BACKLASH1 02
[FEED]
[PAUSE]
BACKLASH1 01
High
Low
BACKLASH1 97
BACKLASH1 99
BACKLASH1 98
To Next Page
Loading...
Need help?
General