3. ONLINE MODE EO13-33005
3.6 Mode Setting
3- 9
3.6 Mode Setting
This mode used to following setting.
LCD Message Description Default Setting
PCL Mode Printer Command Language Setting TPCL
HEAD DIV Head division setting B-EP2:
AUTO1 (automatic selection from none, 2 or 3
division)
B-EP4:
AUTO1 (automatic selection from none, 2, 3 or 6
division)
B-SP MODE B-SP series compatibility mode
setting
OFF (B-SP series compatibility mode is disabled.)
LINERLESS Linerless Setting OFF (Linerless setting is disabled.)
PRINT TYPE Print type setting AUTO (automatic selection from BATCH or STRIP)
For details, refer to System Mode (for service personnel or administrator).
Operation Example
ON LINE
“PAUSE” is displayed.
PAUSE
[PAUSE]
Press the [PAUSE] key.
[PAUSE]
Hold down the [PAUSE] key for 3 seconds or more while the printer is in a pause state.
<1>RESET
[PAUSE]
The reset menu is displayed.
Press the [PAUSE] key.
<2>MODE SETTING
System mode menu display (Mode setting)
[POWER]
Press the [POWER] key.
PCL MODE TPCL
[POWER]
Print command language setting
Press the [POWER] key.
HEAD DIV AUTO
[POWER]
Head division setting
Press the [POWER] key.
B-SP MODE OFF
B-SP series compatibility mode setting
[POWER] Press the [POWER] key.
LINERLESS OFF
Linerless setting
PRINT TYPE AUTO
The printer is turned on, standing by, or printing.
[POWER]
Press the [POWER] key.
Print type setting
Press the [POWER] key.
[POWER]
<2>MODE SETTING
System mode menu display (Mode setting)
Press and hold the [POWER] key for at least 3 seconds.
[POWER]
<1>RESET
The reset menu is displayed.
Press the [POWER] key.
[POWER]
ON LINE
The printer returns to the same state as when the power is turned off and on again.
To Next Page
Loading...
Need help?
General