Toshiba B-EP2DL Series System Mode Manual

4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005
4.4 Parametr Setting
4- 26
4.4 Parameter Setting
In the Parameter Setting mode, various kinds of parameters, such as communication, key, LCD, etc. can be
set. This will allow a use of the printer to comply with your operating conditions.
4.4.1 Parameter Setting Operation Example
LCD density setting
Character code setting
Font zero setting
LCD language setting
Control code setting
EURO font code setting
MaxiCode specification setting
A
uto powe
r
-off timing setting
Power save mode timing setting
LCD backlight off timing setting
[
POWER
]
LCD DENSITY
FONT CODE
ZERO FONT
LCD ENGLISH
CODE AUTO
EURO CODE
MAXI CODE TYPE1
A
UTO OFF 120min
SLEEP 3sec
LCD OFF 3sec
<3>PARAMETER SET
[
POWER
]
[
POWER
]
[POWER]
[
POWER
]
[POWER]
[POWER]
[
POWER
]
[
POWER
]
[
POWER
]
[POWER]
[POWER]
FEED CHECK OFF
BEEP VOL 1
XML
PASSWORD OFF----
<3>PARAMETER SET
<0>SHUTDOWN
Power OFF
Resume printing after broken dots
error setting
Beep volume setting
XML setting
System mode password setting
System mode menu display
(Parameter setting)
System mode menu display
(Shutdown)
[
POWER
]
[
POWER
[
POWER
]
[
POWER
]
[
POWER
]
HEAD ERR PRT OFF
[POWER]
A
utomatic print head check for
broken dots setting
A
UTO HD CHK OFF
Feed to top of feed afte
r
cover close setting
[POWER]
[PAUSE]
[PAUSE]
System mode menu display
(Diagnostic)
System mode menu display
(Mode setting)
<0>SHUTDOWN
Power OFF
While holding down the
[FEED] key, press the
[POWER] key to turn the
power on.
[FEED] and [Power] Keys
System mode menu display
(Shutdown)
<1>DIAGNOSTIC
<2>MODE SETTING
[PAUSE]
System mode menu display
(Parameter setting)
[POWER]
Print head check for broken dots
after cover close setting
HEAD CHK OFF
Hold down the [POWER] key for
3 seconds or more.
The setting is updated at
shutdown.

Toshiba B-EP2DL Series Specifications

General

Brand	Toshiba
Model	B-EP2DL Series
Category	Printer
Language	English