3. ONLINE MODE EO13-33005
3.11 Interface Setting
3- 17
3.11 Interface Setting
This interface setting used to following setting.
(1) IrDA
LCD Message Description Default
PROTOCOL IrDA protocol setting IrCOMM
SPEED IrDA baud rate setting 115200 bps
PRINTER ID Printer ID setting 00001
(2) USB
LCD Message Description Default
SERIAL NUMBER USBのSerial Number Setting Alphanumeric Character: 12 characters
(Character: 0~9, A~Z, Space)
(3) RS-232C
LCD Message Description Default
SPEED RS-232C baud rate setting 9600 bps
PARITY RS-232C parity setting EVEN
(4) Bluetooth
LCD Message Description Default
FACTORY TEST In-process inspection setting OFF
(Device Nickname: TOSHIBA TEC BT)
INQUIRY Inquiry scan time setting EVERY
SECURITY Security Level Setting OFF
SCN INTERVL Inquiry/Page Scan Interval Setting 2048
SCN WINDOW Inquiry/Page Scan Window Setting 36
(5) Wireless LAN
LCD Message Description Default
WLAN Wireless LAN ON/OFF Setting OFF
PRINTER IP ADRES Printer IP Address Setting 192.168.254.254
GATEWAY IP ADRES Gateway IP Address Setting 000.000.000.000
SUBNET MASK Subnet Mask Setting 255.255.000.000
SOCKET PORT Socket Port Setting ON, 08000
DHCP DHCP Setting OFF
WINS WINS Setting OFF
WINS ADRES WINS Address Setting 000.000.000.000
LPR LPR Setting OFF
WLAN STANDARD Standard of the Wireless LAN Setting 11b/g
WLAN MODE Wireless LAN Mode Setting
INFRA
WLAN CODE Wireless LAN encryption setting OFF
WEP/WPA WEP/WPA connection type setting OFF
WEP 802.1X,WPA,WPA2 connection type setting OFF
SETTING 802.1X,WPA,WPA2 authentication type setting OFF
DEFAULT KEY Defaule Key Setting 1
802.11b CHANNEL 802.11b Channel Setting 1
802.11b BAUD 802.11b Baud Rate Setting 11M
802.11g CHANNEL 802.11g Channel Setting 1
802.11g BAUD 802.11g Baud Rate Setting 54M
For details, refer to System Mode (for service personnel or administrator)
To Next Page
Loading...
Need help?
General