Toshiba B-EP2DL Series - Page 3

EO13-33005
4.4 Parameter Setting -------------------------------------------------------------------------------------------------4-26
4.4.1 Parameter Setting Operation Example --------------------------------------------------------------------- 4-26
4.4.2 LCD Density Setting (LCD DENSITY) ---------------------------------------------------------------------- 4-27
4.4.3 Character Code Setting (FONT CODE)-------------------------------------------------------------------- 4-28
4.4.4 Font Zero Setting (ZERO CODE)---------------------------------------------------------------------------- 4-29
4.4.5 LCD Language Setting (LCD) -------------------------------------------------------------------------------- 4-30
4.4.6 Control Code Setting (CODE) -------------------------------------------------------------------------------- 4-31
4.4.7 Euro Font Code Setting (EURO CODE) ------------------------------------------------------------------- 4-33
4.4.8 Maxi Code SpecificationSetting (MAXI CODE)----------------------------------------------------------- 4-33
4.4.9 Auto Power-off Timing Setting (AUTO OFF)-------------------------------------------------------------- 4-34
4.4.10 Power Save Mode Timing Setting (SLEEP)--------------------------------------------------------------- 4-35
4.4.11 LCD Backlight Off Timing Setting (LCD OFF) ------------------------------------------------------------ 4-36
4.4.12 Automatic Print Head Check for Broken Dots At Power On Setting (AUTO HD CHK) --------- 4-37
4.4.13 Print Head Check For Broken Dots After Cover Close Setting (HEAD CHECK)----------------- 4-37
4.4.14 Resume Printing After Broken Dots Error Setting (HEAD ERR PRT)------------------------------- 4-38
4.4.15 Feed To Top Of Feed After Cover Close Setting (FEED CHECK) ---------------------------------- 4-38
4.4.16 Beep Volume Setting (BEEP VOL)-------------------------------------------------------------------------- 4-39
4.4.17 XML Setting (XML) ---------------------------------------------------------------------------------------------- 4-39
4.4.18 System Mode Password Setting (PASSWORD) --------------------------------------------------------- 4-40
4.5 Printer Parameter Fine Adjustment ---------------------------------------------------------------------------4-42
4.5.1 Printer Parameter Fine Adjustment Operation Example ----------------------------------------------- 4-42
4.5.2 Feed Amount Fine Adjustment (FEED ADJ.) ------------------------------------------------------------- 4-43
4.5.3 X-coordinate Fine Adjustment (X ADJUST.) -------------------------------------------------------------- 4-44
4.5.4 Print Tone Fine Adjustment (TONE ADJ.)----------------------------------------------------------------- 4-45
4.5.5 Reflective Sensor Manual Threshold Fine Adjustment (THRESHOLD<R>) ---------------------- 4-46
4.5.6 Transmissive Sensor Manual Threshold Fine Adjustment (THRESHOLD<T>) ------------------ 4-47
4.5.7 Strip Position Fine Adjustment (PEEL ADJ.)-------------------------------------------------------------- 4-48
4.5.8 Paper Size for ESC/POS Setting (PAPER SIZE) -------------------------------------------------------- 4-50
4.6 Test Print-------------------------------------------------------------------------------------------------------------4-51
4.6.1 Test Print Operation Example -------------------------------------------------------------------------------- 4-51
4.6.2 Test Print Setting Item ------------------------------------------------------------------------------------------ 4-53
4.6.3 Test Print Condition Setting (PRINT CONDITION)------------------------------------------------------ 4-55
4.6.4 Test Print Samples ---------------------------------------------------------------------------------------------- 4-59
4.7 Sensor Display/Adjustment -------------------------------------------------------------------------------------4-64
4.7.1 Sensor Display/Adjustment Operation Example --------------------------------------------------------- 4-64
4.7.2 Strip Sensitivity Setting ([PEEL])----------------------------------------------------------------------------- 4-65
4.7.3 Detals of Sensor adjustment Value Display (Sensor A/D Value Display)-------------------------- 4-65
4.7.4 Backlash step Count Adjustment 1(BACKLASH1) ------------------------------------------------------ 4-67
4.7.5 Backlash step Count Adjustment 1(BACKLASH2) ------------------------------------------------------ 4-68
4.8 RAM Clear -----------------------------------------------------------------------------------------------------------4-69
4.8.1 RAM Clear Operation Example ------------------------------------------------------------------------------ 4-69
4.8.2 NO RAM Clear (NO RAM CLEAR) -------------------------------------------------------------------------- 4-69
4.8.3 Parameter Clear (PARAMETER CLEAR) ----------------------------------------------------------------- 4-70
4.8.4 Parameter Clear Operation Example ----------------------------------------------------------------------- 4-70
4.8.5 Maintenance Counter Clear ----------------------------------------------------------------------------------- 4-74
4.8.6 Parameter Clear Operation Example ----------------------------------------------------------------------- 4-74