Toshiba B-EP2DL Series - Page 86

4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005
4.6 Test Print
4- 52
(2) Assembly process test print
Test print condition parameter setting mode
Assembly process test line print mode
Assembly process automatic print mode
(reflective sensor)
Assembly process test pattern print mode
[POWER]
PRINT CONDITION
FACTORY TEST
A
UTO PRINT(TRAN)
A
UTO PRINT(REFL)
PROCESS PRINT
<5>TEST PRINT
[PAUSE] x 6
[PAUSE]
[PAUSE]
[PAUSE]
[FEED] and [PAUSE]
<5>TEST PRINT
System mode menu display (Test Print)
System mode menu display (Test Print)
Press the [PAUSE] key six times.
Assembly process automatic print mode
(transmissive sensor)
While holding down the [FEED] key, press the [PAUSE] key.