Toshiba B-EP2DL Series - Page 88

4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005
4.6 Test Print
4- 54
• Operation for assembly process automatic print /transmissive or refractive sensor
When assembly process automatic print /transmissive sensor is selected:
When assembly process automatic print /reflective sensor is selected:
Note:
When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system mode
menu.
Automatic print mode (transmissive sensor)
Label position check (feed to top of feed)
A
UTO PRINT(TRAN)
A
UTO PRINT(TRAN)
[POWER]
A
UTO PRINT(TRAN)
3-dot slant line print (5 labels)
Bar code print (5 labels)
A
UTO PRINT(TRAN)
[POWER]
A
UTO PRINT(TRAN)
[POWER]
<5>TEST PRINT
Character print (5 labels)
System mode menu display (Test print)
Automatic print mode (reflective sensor)
Label position check (feed to top of feed)
A
UTO PRINT(REFL)
A
UTO PRINT(REFL)
[POWER]
A
UTO PRINT(REFL)
3-dot slant line print (5 labels)
Bar code print (5 labels)
A
UTO PRINT(REFL)
[POWER]
A
UTO PRINT(REFL)
[POWER]
<5>TEST PRINT
Character print (5 labels)
System mode menu display (Test print)