Toshiba B-FV4 Series User Manual

5. MAINTENANCE EO18-33030
5.1 Cleaning
5-3
3. Use a Phillips screwdriver to remove the 2 screws.
4. Remove the Cutter Block from the printer.
NOTE: When attaching the Cutter Block, be sure to insert the hook into the slit of the mid cover.
ScrewScrew
Cutter Block
Cutter Block
Mid Cover
Hook
Slit

Toshiba B-FV4 Series Specifications

General

Resolution	203 dpi
Print Method	Thermal Transfer / Direct Thermal
2D Codes	Data Matrix, PDF417, QR Code, Maxi Code
Operating Temperature	5 – 40 °C
Storage Temperature	-20 – 60 °C
Power Supply	100-240 VAC, 50/60 Hz
Interfaces	USB, Serial (RS-232)
Media Width	25.4 – 112 mm