Toshiba B-FV4 Series User Manual

7. B-FV Setting Tool EO18-33030
7.2 Working with B-FV Setting Tool (V1.0.21)
7-11
Property Name Description
Codepage
A code page is a character set table used to map the characters
input from the keyboard. Each type of code page has its encoding
scheme, and some code pages can describe characters in specific
language. For example, PC-857 supports Turkish; PC-1250
supports most central European and eastern European languages.
Zero Font Display a zero with or without a slash through it.
EURO Code Set the hexadecimal code of the euro sign (€) in the code page.
MaxiCode Spec
TYPE 1 The standard type, in which the default is QM and CGE
printer models.
TYPE 2 The custom type, in which the default is QQ-US printer
models.
Ribbon Sensor
Enable Your printer uses the ribbon sensor to detect the ribbon.
Disable Disable the ribbon sensor.
Multiple Label
It decides how you want to print the image when you use
non-continuous media.
Enable If the printing image is larger than one label, your printer
prints the image on multiple labels across gaps.
Disable If the printing image is larger than one label, your printer
only prints the part one label can contain.
Feed Key
It defines the action of the FEED button.
Feed Your printer feeds a blank label each time the button is
pressed.
Print Your printer reprints the last label each time the button is
pressed.
Auto Head Check
Enable Your printer checks broken pins on the printhead
automatically once your printer is turned on.
Disable Disable the auto head check.
Auto Calibration
ON (Power on) Your printer calibrates the media sensor
automatically once your printer restarts or is turned on.
ON (Power on and Head close) Your printer calibrates the media
sensor automatically every time you close the print module when
your printer is turned on.
OFF You need to calibrate the media sensor manually as you
change the media, or your printer won’t work properly.
Control Code
It is the control code used by Toshiba Printer Control Language
(TPCL).
Auto B-FV Setting Tool detects the control code automatically.
[ESC] [LF] [NUL] or {|} You need to use either one of them as the
control code when inputting commands, or your printer won’t
process them properly.

Toshiba B-FV4 Series Specifications

General

Resolution	203 dpi
Print Method	Thermal Transfer / Direct Thermal
2D Codes	Data Matrix, PDF417, QR Code, Maxi Code
Operating Temperature	5 – 40 °C
Storage Temperature	-20 – 60 °C
Power Supply	100-240 VAC, 50/60 Hz
Interfaces	USB, Serial (RS-232)
Media Width	25.4 – 112 mm