7. B-FV Setting Tool EO18-33030
7.2 Working with B-FV Setting Tool (V1.0.21)
7-17
7. In the Setting LAN dialog box, do one of the following to configure your IP address:
∙ If you are using a static IP address, in the IP
Address box, enter the IP address under
TCP/IP in the LAN tab, and then click OK.
∙ If you are using a dynamic IP address
provided by DHCP, in the IP Address box,
enter the IP address under Current TCP/IP
in the LAN tab, and then click OK.
Note When DHCP is enabled and your printer is idle for a long time, the IP address
of your printer may change. Click Get to get the new IP address if you find the
current IP address is not working.
To Next Page
Loading...
