Toyota 2002 Camry - Page 1029

I32848
Approx. 0.3
seconds
Approx. 2.2
seconds
ON
OFF
10 – 14 V
0 V
Voltage between terminal
7 (+1) and 5 (EW):
E34081
E57881
4
+5 
–10
Automatic Stop Position
–WIPER & WASHER WIPER AND WASHER SYSTEM
66–5
2491Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(c) Operation Check (Front Wiper)
(1) Turn the wiper switch to OFF.
(2) Connect the battery (+) to terminal 17 (+B) of the
connector, the battery (–) to terminal 16 (+S) and 2
(EW) of the connecter.
(3) Connect the voltmeter (+) terminal to terminal 7 (+1)
of the connector, and the voltmeter (–) terminal to
terminal 2 (EW) of the connector. Turn the washer
switch to ON and OFF, and check voltage between
terminal 7 (+1) and terminal 2 (EW).
2. WINDSHIELD WIPER MOTOR ASSY
(a) LO Operation Check
(1) Connect the battery (+) to terminal 1 (+1) of the con-
nector, the battery (–) to terminal 5 (E) of the con-
nector, and check that the motor operates at low
speed (LO).
(b) HI Operation Check
(1) Connect the battery (+) to terminal 4 (+2) of the con-
nector, the battery (–) to terminal 5 (E) of the con-
nector, and check that the motor operates at high
speed (HI).
(c) Automatic Stop Operation Check
(1) Connect the battery (+) to terminal 1 (+1) of the con-
nector, the battery (–) to terminal 5 (E) of the con-
nector. With the motor being rotated at low speed
(LO), disconnect terminal 1 (+1) to stop the wiper
motor operation at any position except the automat-
ic stop position.
(2) Connect terminals 1 (+1) and 3 (S), and the battery
(+) to terminal 2 (B) to restart the motor operation at
low speed.
SST 09843–18040
(3) Check the automatic stop position.