6007I–01
H41414
–SUPPLEMENTAL RESTRAINT SYSTEM SPIRAL CABLE SUB–ASSY
60–25
2408Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
REPLACEMENT
HINT:
COMPONENTS: See page 60–14
1. PRECAUTION(See page 60–1)
2. SEPARATE BATTERY NEGATIVE TERMINAL(See page 60–1)
3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4. REMOVE STEERING WHEEL COVER LOWER NO.2
5. REMOVE STEERING WHEEL COVER LOWER NO.2 (W/O STEERING PAD SWITCH 4 SPOKE
STEERING WHEEL)
6. REMOVE STEERING WHEEL COVER LOWER NO.3(3 SPOKE STEERING WHEEL ASSY)
7. REMOVE CONNECTOR COVER (W/ STEERING PAD SWITCH 4 SPOKE STEERING WHEEL)
8. REMOVE HORN BUTTON ASSY
(See page 60–15)
9. REMOVE STEERING WHEEL ASSY
(See page 50–9)
SST 09950–50013 (09951–05010, 09952–05010, 09953–05020, 09954–05021)
10. REMOVE INSTRUMENT CLUSTER FINISH PANEL
(See page 71–12)
11. REMOVE STEERING COLUMN COVER
12. REMOVE SPIRAL CABLE SUB–ASSY
(a) Disconnect the airbag connector and connector from the
spiral cable sub–assy.
(b) Release the 3 claws and remove the spiral cable sub–
assy.
13. INSPECT SPIRAL CABLE SUB–ASSY
(a) If the following condition is identified, replace the spiral cable sub–assy with new one.
Condition:
Scratches or cracks on the connector
Cracks, dents or chipping of the spiral cable sub–assy
14. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
(a) Check that the front wheels are facing straight ahead.
To Next Page
Loading...
