Toyota 2002 Camry - Remove Generator Pulley

1908X–01
A38024
A38025
SST 1 – A
A38104
A38105
–STARTING & CHARGING GENERATOR ASSY (2AZ–FE)
19–15
1887Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
OVERHAUL
1. REMOVE GENERATOR PULLEY
SST 09820–63010 (09820–06010, 09820–06020)
HINT:
SST1 – A, B 09820–06010
SST2 09820–06020
(a) Hold SST 1 – A with a torque wrench, and tighten SST 1
– B clockwise to the specified torque.
Torque: 39 N⋅m (400 kgf⋅cm, 29 ft⋅lbf)
NOTICE:
Check that SST is secured to the rotor shaft.
(b) Mount SST 2 in a vise.
(c) Insert SST 1 – A, B into SST 2, and attach the pulley nut
to SST 2.
(d) To loosen the pulley nut, turn SST 1 – A in the direction
shown in the illustration.
NOTICE:
To prevent damage to the rotor shaft, do not loosen the
pulley nut more than one–half of a turn.
(e) Remove the alternator form SST 2.
(f) Turn SST 1 – B, and remove SST 1 – A, B.
(g) Remove the pulley nut and pulley.