Toyota 2002 Camry - ABS & Traction Actuator Assy (W; VSC) Replacement

320CR–01
F40999
C86250
From M/C 2nd
To FL W/C
From M/C 1st
To RR W/C
To RL W/C
To FR W/C
32–52
–BRAKE ABS & TRACTION ACTUATOR ASSY (w/ VSC)
2040Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
REPLACEMENT
1. DRAIN BRAKE FLUID
NOTICE:
Wash off the brake fluied immediately if it comes into contact with a painted surface.
2. REMOVE ABS & TRACTION ACTUATOR ASSY WITH
BRACKET
(a) Slide the clip and disconnect the actuator No. 1 hose from
the actuator.
(b) Disconnect the master cylinder pressure sensor connec-
tor and harness clamp.
(c) Using SST, disconnect the 6 brake lines from the actuator.
SST 09023–00100
(d) Use tags or make a memo to identify the place to recon-
nect.
(e) Disconnect the actuator connector.
(f) Remove the 3 nuts and brake actuator with bracket.
3. REMOVE ABS & TRACTION ACTUATOR ASSY
(a) Remove the 2 nuts and ABS & TRACTION actuator from the bracket.
(b) Remove the 2 holders and 3 cushions from the actuator.
4. INSTALL ABS & TRACTION ACTUATOR ASSY
(a) Install the 3 cushions and 2 holders to the ABS & TRACTION actuator.
(b) Install the actuator to the bracket with the 2 nuts.
Torque: 5.4 N⋅m (55 kgf⋅cm, 48 in.⋅lbf)