2705Z–01
B53735
B53736
27–10
–REAR SUSPENSION REAR SUSPENSION ARM ASSY NO.1 LH
1943Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
REAR SUSPENSION ARM ASSY NO.1 LH
REPLACEMENT
HINT:
COMPONENTS: See page 27–2
1. REMOVE REAR WHEEL
2. REMOVE EXHAUST PIPE ASSY CENTER
(a) 1MZ–FE engine: See page 15–5
(b) 2AZ–FE engine: See page 15–2
3. REMOVE STABILIZER BAR REAR
(See page 27–17)
4. SEPARATE STRUT ROD ASSY REAR
(See page 27–19)
5. SEPARATE REAR SUSPENSION ARM ASSY NO.2 LH
(a) Remove the bolt, nut and rear suspension arm No. 2 (out-
er side) from the rear carrier.
HINT:
Keep the nut fixed while loosening and removing the bolt.
6. SEPARATE REAR SUSPENSION ARM ASSY NO.2 RH
HINT:
Separate the RH side by the procedures with the LH side.
7. SEPARATE REAR SUSPENSION ARM ASSY NO.1 LH
(a) Remove the bolt, nut and rear suspension arm No. 1 (out-
er side) from rear axle carrier.
HINT:
Keep the nut fixed while loosening and removing the bolt.
8. SEPARATE REAR SUSPENSION ARM ASSY NO.1 RH
HINT:
Separate the RH side by the procedures with the LH side.
To Next Page
Loading...
