B53742
B53744
B53744
B53747
38 mm (1.5 in.)
B53748
Front
–REAR SUSPENSION REAR SUSPENSION ARM ASSY NO.1 LH
27–11
1944Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
9. REMOVE REAR SUSPENSION MEMBER SUB–ASSY
(a) Support the rear suspension member with a jack.
(b) Remove the 4 nuts, 2 bolts and 4 retainers from the rear
suspension member.
10. REMOVE REAR SUSPENSION ARM ASSY NO.1 LH
(a) Lower the rear suspension member.
(b) Remove the bolt and lower suspension arm No. 1.
11. INSTALL REAR SUSPENSION ARM ASSY NO.1 LH
(a) Install the lower suspension No. 1 with the bolt, nut and
temporary tighten the bolt.
(b) Set suspension arm in the position shown in the illustra-
tion and fully tighten the bolt.
Torque: 100 N⋅m (1,020 kgf⋅cm, 74 ft⋅lbf)
HINT:
Install the lower suspension No. 1 so that the bracket leans to-
ward the front of the vehicle, as shown in the illustration.
To Next Page
Loading...
