1602V–02
SST
B11275
B11276
0.5 – 1.0 mm
(0.020 – 0.039 in.)
B11278
16–8
–COOLING WATER PUMP ASSY (2AZ–FE)
1827Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
WATER PUMP ASSY (2AZ–FE)
REPLACEMENT
1. DRAIN COOLANT (See page 16–6)
2. REMOVE FAN AND GENERATOR V BELT
(See page 14–5)
SST 09249–63010
3. REMOVE GENERATOR ASSY
(See page 19–13)
4. REMOVE WATER PUMP PULLEY
(a) Using SST, remove 4 bolts and pump pulley.
SST 09960–10010 (09962–01000, 09963–00700)
(b) Disconnect the crankshaft position sensor wire harness
clamp.
5. REMOVE WATER PUMP ASSY
(a) Remove 4 bolts, 2 nuts, bracket and water pump.
6. INSTALL WATER PUMP ASSY
(a) Remove any old packing(FIPG) material from the contact
surface.
(b) Apply seal packing to the water pump as shown in the il-
lustration .
Seal packing:
Part No. 08826–00080 or equivalent
NOTICE:
Remove any oil from the contact surface.
install the water pump within 5 minutes after apply-
ing.
Do not put into engine oil within 2 hours after instal-
ling.
To Next Page
Loading...
