320CS–01
F40301
C83035
32–58
–BRAKE SKID CONTROL SENSOR
2046Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
SKID CONTROL SENSOR
REPLACEMENT
HINT:
Replace the RH side by the same procedure with LH side.
1. REMOVE REAR WHEEL
2. DISCONNECT SKID CONTROL SENSOR WIRE
(a) Disconnect the connector from the skid control sensor.
3. REMOVE REAR DISC BRAKE CALIPER ASSY, LH(See page 32–33)
4. REMOVE REAR DISC
5. REMOVE REAR AXLE HUB & BEARING ASSY LH
(a) Remove the 4 bolts and rear axle hub & bearing assy.
To Next Page
Loading...
