C84803
F41018
F41017
A
B
F41016
–BRAKE SPEED SENSOR FRONT LH
32–57
2045Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
4. INSTALL SPEED SENSOR FRONT LH
(a) Install the speed sensor FR LH with the bolt.
Torque: 8.0 N⋅m (82 kgf⋅cm, 71 in.⋅lbf)
NOTICE:
Make sure the sensor tip is clean.
(b) Install the sensor harness clamps with the 2 bolts ”A” and
”B” to the body and shock absorber.
Torque:
Bolt A: 5.0 N⋅m (51 kgf⋅cm, 44 in.⋅lbf)
Bolt B: 18.8 N⋅m (192 kgf⋅cm, 14 ft⋅lbf)
(c) Connect the clamp to the knuckle.
(d) Connect the speed sensor connector and clamp.
5. INSTALL FRONT FENDER LINER LH
6. INSTALL FRONT WHEEL
Torque: 103 N⋅m (1,050 kgf⋅cm, 76 ft⋅lbf)
7. CHECK ABS SPEED SENSOR SIGNAL(See page 05–363 or 05–404 or 05–452)