Toyota 2002 Camry - Speed Sensor Replacement

40060–02
C90569
C90570
C90570
40–24
–AUTOMATIC TRANSMISSION / TRANS SPEED SENSOR
2099Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
SPEED SENSOR
REPLACEMENT
1. REMOVE BATTERY
2. REMOVE ENGINE COVER SUB–ASSY NO.1
3. REMOVE AIR CLEANER ASSY
4. REMOVE AIR CLEANER HOSE NO.1
5. REMOVE SPEED SENSOR(NT SENSOR)
(a) Disconnect the speed sensor connector.
(b) Remove the bolt and speed sensor.
6. REMOVE SPEED SENSOR(NC SENSOR)
(a) Disconnect the speed sensor connector.
(b) Remove the bolt and speed sensor.
7. INSTALL SPEED SENSOR(NC SENSOR)
(a) Coat an O–ring with ATF.
(b) Install the speed sensor with the bolt.
Torque: 11.3 N⋅m (115 kgf⋅cm, 8 ft⋅lbf)
HINT:
Make sure of the manufacturer’s name.
(c) Connect the speed sensor connector.