2601J–02
F40143
C91607
–FRONT SUSPENSION STABILIZER BAR FRONT
26–19
1931Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
STABILIZER BAR FRONT
REPLACEMENT
HINT:
COMPONENTS: See page 26–3.
1. REMOVE FRONT WHEEL
2. REMOVE FRONT STABILIZER LINK ASSY LH
(a) Remove the 2 nuts and front stabilizer link assy LH.
HINT:
If the ball joint turns together with the nut, use a hexagon (6 mm)
wrench to hold the stud.
3. REMOVE FRONT STABILIZER LINK ASSY RH
HINT:
Remove the RH side by the same procedures with the LH side.
4. REMOVE FRONT SUSPENSION MEMBER DYNAMIC DAMPER(EXCEPT 1MZ–FE ENGINE TYPE)
(a) Remove the 2 bolts and front suspension member dynamic damper from the front frame assy.
5. REMOVE FRONT STABILIZER BRACKET NO.1 LH
(a) Remove the 2 bolts and 2 front stabilizer brackets No. 1
LH.
6. REMOVE FRONT STABILIZER BRACKET NO.1 RH
HINT:
Remove the RH side by the same procedures with the LH side.
7. DISCONNECT TIE ROD ASSY LH
(See page 30–8)
SST 09628–62011
To Next Page
Loading...
