12
3
4
5
Bearing Cap No. 2
Bearing Cap No. 3
A52476
1
4
2 3
5
A60084
A60067
A61987
–ENGINE MECHANICAL CYLINDER HEAD GASKET (2AZ–FE)
14–99
1623Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
26. INSTALL NO.2 CAMSHAFT
(a) Tighten the camshaft bearing cap No.2 and No.3 as the
sequence shown in the illustration.
Torque:
Bearing cap No.2 30 N⋅m (301 kgf⋅cm, 22 ft⋅lbf)
Bearing cap No.3 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
27. INSTALL EXHAUST MANIFOLD CONVERTER
SUB–ASSY
(a) Install a new gasket and the exhaust manifold with the 5
nuts.
Torque: 37 N⋅m (378 kgf⋅cm, 27 ft⋅lbf)
(b) Install the No.1 and No.2 exhaust manifold stay with the
3 bolts and 2 nuts.
Torque: 44 N⋅m (449 kgf⋅cm, 32 ft⋅lbf)
28. INSTALL EXHAUST MANIFOLD HEAT INSULATOR NO.1
Torque: 12 N⋅m (122 kgf⋅cm, 9 ft⋅lbf)
29. INSTALL INTAKE MANIFOLD
(a) Install a new gasket and the intake manifold with the 5
bolts and 2 nuts.
Torque: 30 N⋅m (306 kgf⋅cm, 22 ft⋅lbf)
30. CONNECT FUEL TUBE SUB–ASSY
(See page 11–1)
31. INSTALL CHAIN SUB–ASSY
(See page 14–74)
SST 09309–37010
To Next Page
Loading...
