Toyota 2002 Camry - Rear Suspension Arm Assy No.2 LH Replacement

27060–01
C82992
C82993
27–14
–REAR SUSPENSION REAR SUSPENSION ARM ASSY NO.2 LH
1947Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
REAR SUSPENSION ARM ASSY NO.2 LH
REPLACEMENT
HINT:
COMPONENTS: See page 27–2
1. REMOVE REAR WHEEL
2. REMOVE EXHAUST PIPE ASSY CENTER
(a) 1MZ–FE engine: See page 15–5
(b) 2AZ–FE engine: See page 15–2
3. REMOVE STABILIZER BAR REAR
(See page 27–17)
4. SEPARATE REAR SUSPENSION ARM ASSY NO.1 LH
(See page 27–10)
5. SEPARATE REAR SUSPENSION ARM ASSY NO.1 RH
HINT:
Separate the RH side by the procedures with the LH side.
6. SEPARATE REAR SUSPENSION ARM ASSY NO.2 LH
(See page 27–14)
7. SEPARATE REAR SUSPENSION ARM ASSY NO.2 RH
HINT:
Separate the RH side by the procedures with the LH side.
8. SEPARATE STRUT ROD ASSY REAR
(See page 27–19)
9. REMOVE REAR SUSPENSION MEMBER SUB–ASSY
(See page 27–10)
10. REMOVE REAR SUSPENSION ARM ASSY NO.2 LH
(a) Remove the bolt and disconnect the rear suspension arm
No. 2 (inner side).
(b) Remove the bolt, nut and the rear suspension arm No. 2
(outer side) from rear axle carrier.
HINT:
Keep the nut fixed while loosening and removing the bolt.