4202F–01
D08941
Matchmarks
Q06032
42–14
–CLUTCH CLUTCH UNIT
2229Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
CLUTCH UNIT
OVERHAUL
1. REMOVE MANUAL TRANSAXLE ASSY
(See page 41–11)
2. REMOVE CLUTCH RELEASE FORK BOOT
3. REMOVE CLUTCH RELEASE BEARING ASSY
4. REMOVE CLUTCH RELEASE FORK SUB–ASSY
5. REMOVE RELEASE BEARING HUB CLIP
6. REMOVE RELEASE FORK SUPPORT
(a) Remove the release fork support from the manual transaxle assy.
7. REMOVE CLUTCH COVER ASSY
(a) Place the matchmarks on the clutch cover assy with the
one on the flywheel sub–assy.
(b) Loosen each set bolt one turn at a time until spring tension
is released.
(c) Remove the set bolts and pull off the clutch cover assy.
NOTICE:
Do not drop the clutch disc assy.
8. REMOVE CLUTCH DISC ASSY
NOTICE:
Keep the lining part of the clutch disc assy, the pressure plate and surface of the flywheel sub–assy
away from oil and foreign attachment.
9. INSPECT CLUTCH DISC ASSY
(a) Using vernier calipers, measure the rivet head depth.
Maximum rivet depth: 0.3 mm (0.012 in.)
If necessary, replace the clutch disc assy.
To Next Page
Loading...
