D25721
Transaxle
Side
C57466
D25281
A
B
D08943
N00414
–CLUTCH CLUTCH UNIT
42–15
2230Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(b) Install the clutch disc assy to the transaxle assy.
NOTICE:
Take care not to insert the clutch disc assy in the wrong
direction
(c) Using a dial indicator, check the clutch disc assy runout.
Minimum runout: 0.8 mm (0.031 in.)
If necessary, replace the clutch disc assy.
10. INSPECT CLUTCH COVER ASSY
(a) Using vernier calipers, inspect the diaphragm spring for
depth and width of wear.
Maximum:
A (Depth): 0.5 mm (0.020 in.)
B (Width): 6.0 mm (0.236 in.)
If necessary, replace clutch cover assy.
11. INSPECT FLYWHEEL SUB–ASSY
(a) Using a dial indicator, inspect the flywheel sub–assy run-
out.
Maximum runout: 0.1 mm (0.004 in.)
If necessary, replace the flywheel sub–assy.
12. INSPECT CLUTCH RELEASE BEARING ASSY
(a) Turn the release bearing assy by hand while applying
force in the axial direction.
HINT:
The bearing is permanently lubricated and requires no cleaning
or lubrication.
If necessary, replace the release bearing assy.
To Next Page
Loading...
