140HV–01
A59888
14–74
–ENGINE MECHANICAL CHAIN (2AZ–FE)
1598Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
CHAIN (2AZ–FE)
REPLACEMENT
1. REMOVE HOOD SUB–ASSY
2. REMOVE FRONT WHEEL RH
3. REMOVE ENGINE UNDER COVER LH
4. REMOVE ENGINE UNDER COVER RH
5. REMOVE FRONT FENDER APRON SEAL RH
6. DRAIN ENGINE OIL
(a) Install a new gasket and the drain plug after draining engine oil.
Torque: 25 N⋅m (255 kgf⋅cm, 18 ft⋅lbf)
7. REMOVE EXHAUST PIPE ASSY FRONT
8. REMOVE ENGINE MOVING CONTROL ROD
W/BRACKET
(a) Remove the 3 bolts and engine moving control rod w/
bracket.
9. REMOVE ENGINE MOUNTING STAY NO.2 RH
10. REMOVE ENGINE MOUNTING BRACKET NO.2 RH
11. REMOVE FAN AND GENERATOR V BELT
(See page 14–5)
12. REMOVE ENGINE COVER SUB–ASSY NO.1
13. DISCONNECT ENGINE WIRE
14. REMOVE GENERATOR ASSY
15. REMOVE VANE PUMP ASSY
(See page 51–8)
NOTICE:
Do not disconnect the hose.
16. REMOVE IGNITION COIL ASSY
17. DISCONNECT VENTILATION HOSE
To Next Page
Loading...
