Toyota 2002 Camry - Output Shaft Assy (E351) Overhaul

41050–01
C69636
C69637
C69638
–MANUAL TRANSMISSION/TRANSAXLE OUTPUT SHAFT ASSY (E351)
41–63
2193Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
OUTPUT SHAFT ASSY (E351)
OVERHAUL
1. INSPECT 1ST GEAR THRUST CLEARANCE
(a) Using a feeler gauge, measure the 1st gear thrust clear-
ance.
Standard clearance:
0.25 – 0.40 mm (0.0098 – 0.0157 in.)
2. INSPECT 2ND GEAR THRUST CLEARANCE
(a) Using a dial indicator, measure the 2nd gear thrust clear-
ance.
Standard clearance:
0.10 – 0.35 mm (0.0039 – 0.0138 in.)
3. INSPECT 1ST GEAR RADIAL CLEARANCE
(a) Using a dial indicator, measure the 1st gear radial clear-
ance.
Standard clearance: mm (in.)
Bearing Standard clearance
KOYO made
0.009 – 0.053
(0.0004 – 0.0021)
NSK made
0.009 – 0.051
(0.0004 – 0.0020)
If the clearance is out of the specification, replace the 1st gear
needle roller bearing.