C69548
C69547
C69546
41–62
–MANUAL TRANSMISSION/TRANSAXLE INPUT SHAFT ASSY (E351)
2192Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
32. INSPECT 4TH GEAR RADIAL CLEARANCE
(a) Using a dial indicator, measure the 4th gear radial clear-
ance.
Standard clearance: mm (in.)
Bearing Standard clearance
KOYO made
0.009 – 0.053
(0.0004 – 0.0021)
NSK made
0.009 – 0.051
(0.0004 – 0.0020)
If the clearance exceeds the maximum, replace the 4th gear
needle roller bearing.
33. INSPECT 3RD GEAR THRUST CLEARANCE
(a) Using a dial indicator, measure the 3rd gear thrust clear-
ance.
Standard clearance:
0.10 – 0.35 mm (0.0039 – 0.0138 in.)
34. INSPECT 4TH GEAR THRUST CLEARANCE
(a) Using a feeler gauge, measure the 4th gear thrust clear-
ance.
Standard clearance:
0.10 – 0.57 mm (0.0039 – 0.0224 in.)
To Next Page
Loading...
