Toyota 2002 Camry - Cylinder Head Assy (2 AZ-FE) Overhaul; Remove Intake Valve; Remove Exhaust Valve

14061–02
SST
Wooden Blocks
A52444
SST
Wooden Blocks
A52472
A13356
–ENGINE MECHANICAL CYLINDER HEAD ASSY (2AZ–FE)
14–107
1631Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
CYLINDER HEAD ASSY (2AZ–FE)
OVERHAUL
1. REMOVE VALVE LIFTER
HINT:
Arrange the valve lifters in the correct order.
2. REMOVE INTAKE VALVE
(a) Using SST and wooden blocks, compress and remove
the 8 valve spring retainer locks.
SST 09202–70020 (09202–00010)
(b) Remove the parts below from the cylinder head.
1 Retainer
2 Valve spring
3 Intake valve
HINT:
Arrange the removed parts in the correct order.
3. REMOVE EXHAUST VALVE
(a) Using SST and wooden blocks, compress and remove
the 8 valve spring retainer locks.
SST 09202–70020 (09202–00010)
(b) Remove the parts below from the cylinder head.
1 Retainer
2 Valve spring
3 Exhaust valve
4. REMOVE VALVE STEM OIL O SEAL OR RING
(a) Using needle–nose pliers, remove the oil seals.
5. REMOVE VALVE SPRING SEAT
6. REMOVE STUD BOLT